Here’s How to Troubleshoot and Perform Heater Repair in Glendale

If you are having trouble with your heater, your first instinct might be to find professional heater repair in Glendale. This is definitely the best call most of the time, but here are a few ways to figure out what’s wrong with your unit beforehand.

Problems with the Furnace Filter

Before anything else, the best thing to check is the filters in your heater. After all, these get dirty due to the constant intake of dust and dirt, quickly interrupting the airflow and clogging up the filter. In the best of cases, clogged filters decrease the air quality of the room in question. In the worst, well, your heater will stop working. It can keep the heater from starting up in the first place, as well as cause premature breakdowns and become a fire hazard. In order to check whether or not the filter is the problem, turn the thermostat off and flip the heater switch off. Hold up the filter to a light source. If the light doesn’t really shine through, then the filter definitely needs to be cleaned or replaced. Do this every month to make sure your air is clean.

Problems with the Thermostat

If the filter is changed and the heater still won’t run, then the problem might be with the thermostat. To check whether this is the case or not, set it to heat and set the temperature at least five degrees above the current room temperature. Replace the batteries if that’s the problem with the thermostat. For electromechanical thermostats, then you might need to open it up and dust it off using a soft brush to remove dirt from the metal coils and contact plates. Lastly, make sure that the thermostat itself isn’t being affected by external sources. Lights, ovens, and sunlight can all cause false readings. This can cause it to stop heating before it should or to not reach the necessary temperatures.

Problems with the Switch and Panel

If the problem doesn’t seem to be caused by either the filter or the thermostat, then power might be the problem. If you think this might be the issue, check the furnace switch near the furnace, for someone might have accidentally turned it off at some point. In these cases, flip it back on. If that doesn’t work, check the electrical panel and make sure that power is turned on at the breaker box. If the heater breaker is switched off, flip the switch all the way off, then flip it back on again so that you hear a click. If there’s no power coming to the fuse box, look for the melted fuse, unscrew it, and replace it with a fuse of the same type and size. Then, turn the heater back on and see if power was restored to it. If this isn’t working, then you might need to contact professional heater repair in Glendale.

Heater Repair in Glendale

At American Cool and Heat, we specialize in repairing any malfunctioning of heating and air conditioning equipment all across Glendale and the general Los Angeles area. We take pride in delivering only the best available services, guaranteeing optimal performance. For heater repair in Glendale and other services, give us a call at (818) 722-8634 if you find yourself in need of a repair and we’ll be right there.